Affordable AC Tune-Ups in Los Angeles: Boost Efficiency & Prevent Costly Repairs

I was called to a home to check out a package unit that was not working properly. Upon arrival, I checked all components of the unit and found that the gas valve was making a loud noise when activated. I adjusted the gas pressure to 2.9 and that fixed the noise. However, I noticed that the pressure transducer was reading high, indicating that the unit was not operating at the correct pressure. I recommended a deep clean of the unit to address the issue.

I went to a service call for a smell being omitted. Upon arrival, I noticed a plumbing issue. The smell was coming from the kitchen sink. I checked the pipes and found a clog. I cleared the clog and the smell was gone.

Estimate Northridge

I recently completed a job for a customer who needed a dual zone mini split installed in their home. The job required me to measure the space, select the appropriate unit, and install the system. I also had to ensure that the unit was properly wired and connected to the electrical system. The customer was very pleased with the results of the job and expressed how much more comfortable their home was now. I was happy to have been able to help them improve their home's comfort and efficiency.

I was working as a commercial HVAC technician and was called to a job that was not in my area of expertise. I informed the customer that I could not complete the job and gave them the contact information for a company that could help them.

I was a home service technician who was called to diagnose a heat exchanger issue in a customer's home. Upon arrival, I performed a thorough inspection of the heat exchanger and found no cracks or major burn marks. I provided the customer with all the necessary information and explained the findings. The customer was satisfied with the diagnosis and the work was completed to their satisfaction.

I was called to a home in the suburbs to repair a collapsed duct and run a new condensation line. The duct was located in the attic and had been damaged by a tree branch. I removed the damaged section of the duct and replaced it with a new one. I also ran a new condensation line from the air conditioner to the exterior of the house. The job took several hours to complete, but I was able to complete it on time and to the customer's satisfaction.

I checked the condenser status capacitor and contactor and found them to be in good condition. However, I recommend that the condenser be deep cleaned and the rotobrush cleaning be performed. The condenser is the part of the air conditioner that is responsible for cooling the air. It is important to keep it clean to ensure that it works properly and efficiently. The rotobrush cleaning is a specialized cleaning method that uses a brush to remove dirt and debris from the condenser coils. This can help improve the condenser's performance and increase its lifespan.

I am a highly skilled home service professional who recently completed a job for a client. The job involved installing a new water heater in their home. I arrived on time and assessed the situation to determine the best course of action. I then removed the old water heater and installed the new one, ensuring that it was properly secured and connected to the plumbing system. I also made sure that the new water heater was the correct size and type for the client's needs. After the installation was complete, I tested the water heater to ensure that it was working properly. I then cleaned up the work area and left the client with a detailed estimate of the cost of the job. The client was very pleased with the work and expressed gratitude for my professionalism and attention to detail. I am proud of the job I completed and look forward to completing more jobs in the future.

I am a highly skilled and experienced home service professional. I recently completed a job that involved inspecting and servicing a heat exchanger. The heat exchanger is a critical component of a heating and cooling system, and it plays a vital role in maintaining the comfort and safety of a home. During the inspection, I carefully examined the heat exchanger for any signs of damage, corrosion, or wear. I also checked the connections and seals to ensure they were tight and in good condition. If any issues were found, I made the necessary repairs or replacements to restore the heat exchanger to its proper functioning. In addition to the inspection, I also performed a thorough cleaning of the heat exchanger to remove any debris or buildup that could affect its performance. This involved using specialized cleaning agents and tools to ensure that the heat exchanger was clean and free from any contaminants. After the inspection and cleaning, I followed up with the homeowner to ensure th